# <center>Details button</center>

This button opens the following window:

![Bouton détail](baseUrl/statsDescriptives/Details/Bouton-detail.jpg)


The histogram and complete analysis opens by clicking on the Histo button

![Histogramme](baseUrl/statsDescriptives/Details/Histogramme.jpg)

By clicking on the Chart button you get the following chart:

![Carte de controle](baseUrl/statsDescriptives/Details/Carte-de-controle.jpg)

### Label

Allows you to select the column that will be used to show the control charts' x axes (date,batch n°…).

### Repetition

If samples are entered in several columns (for example, a sample of 2 for Y6), then we put the sample size in the repetition column. 
Nb lines

If the samples are entered in one column but you need to take samples by grouping the lines in 3's (example Y2), then we enter 3 in the number of lines. 

### Target

The default target is the centre of the tolerances.  Another target can be defined. 

### Sigma (short term)

Used to calculate control charts The short term sigma is calculated by default from the samples. If it is not known it can be defined. 

### Cp, Pp, Ppk, Ppm

This analysis gives you the entirety of the capability analysis calculations. 

### Distribution law analysis

- Distribution parameters with their respective confidence intervals
- Capability indicators
- Off tolerance proportion calculation
- Normality analysis

Three graphs illustrate the analysis: a histogram with tolerances, a box plot and a probability diagram. 
The default calculation is done according to normal distribution, but other distributions can be used:
- 2 or 3 parameter Weibull distributions
- Log normal distribution
- Gamma distribution
- Folded normal distribution
- Rayleigh distribution
 
When the normal distribution hypothesis is rejected (normal distribution rejected) then another law is chosen out of those proposed on the bottom of the sheet. 

Other statistical transformations can be found by clicking on "other transformations".
 
### The control chart

This analysis provides the control chart by mean/median and standard deviation/range.  The EWMA chart is also available.  The choice is made by selecting the charts from the panel on the left. 

The testing parameters of the mean are shown in the green zone.  Testing parameters in the red zone. An off tolerance value is shown in red. Any mean outside of the control is shown in red. The control charts can have variable sample sizes, the limits will be subsequently adjusted.  


Guida utente

Details button

Label

Repetition

Target

Sigma (short term)

Cp, Pp, Ppk, Ppm

Distribution law analysis

The control chart

Una soluzione completa per l'Industria 4.0