Menu della guida per l'utente

Guida utente

Chart of averages

The Shewart principle functions well for one part in theory, but in practical application it does not support the evasion of weak derivations in the procedure
Let us take the following example:
The procedure capability is 1.6, therefore we were able to calculate the limits of the control procedure and measure the black part.
Principe de Shewart
This part is well below the control limit, so we can not say that the process is off center. And yet, the process could well be off center (red curve) without being noticed.
The result of the measurement of a part is indeed the sum:
  • Of the off-centering
  • Of random variations in the procedure
To be able to observe the type of de-centering, we use the fundamental average property:
Once an average is calculated using n parts, the dispersion of the mean of these n parts is much smaller than the dispersion of only one part;
If we use the preceding example by using an average of 5 parts:
Carte aux moyenne principe
  • Because the dispersion of the mean is much smaller, the control limits will also be much tighter (grey zone)
  • The average of the 5 parts will also be closer to the true de-centering procedure But, while using individual charts, the probability of detecting this de-centering was very small, and while using an averages chart the same decentering will be detected much faster.

Using Ellistat

To open an average values chart, enter the data in several consecutive columns, indicate the number of repetitions (the number of successive columns containing the data) and open the averages chart.
Utilisation Ellistat

Using averages

It is sometimes easier to calculate the median of 3 or 5 parts than it is to calculate the mean/average. In this case, using the averages chart is preferable as it is simpler and contains practically the same properties as an averages chart.

Una soluzione completa per l'Industria 4.0

8 moduli statistici

trial

Test

€ 0

30 giorni

Testalo gratuitamente

APC

SPC

Controllo

Analisi

check

30 giorni

check

Tutte le funzioni di Ellistat

check

1 utente

Supporto tecnico e ed aggiornamenti inclusi

student

Studenti

€ 0

1 anno

Checkout

Analisi

check

1 anno

check

Tutte le funzioni di Ellistat

check

1 utente

check

Licenza dedicata agli studenti che dispongono di una tessera studente in corso di validità

Supporto tecnico e ed aggiornamenti inclusi

standard

Standard

€ 49

per utente al mese

Checkout

Analisi

check

Licenza rinnovata ogni mese

check

Tutte le funzioni di Ellistat

check

Utenti illimitati

check

Supporto tecnico e ed aggiornamenti inclusi